Vì sao e6300 chạy được trên plga775 và lga 775
Cpu core 2 E8400 8500 8600 cho main socket 775 Show Chọn loại hàng (ví dụ: màu sắc, kích thước) Màu sắc 8400, 8500, 8600, E7500, E8200 e8300 Chi tiết sản phẩm Cpu thích hợp trên main g31 g41 socket 775 Cpu xung nhịp 3g bus 1333 cache 6m Bạn nào có nhu cầu hay thắc mắc vui lòng chat trực tiếp với shop để được tư vấn ĐÁNH GIÁ SẢN PHẨM Xem tất cả thanhtrung2810 CPU vẫn còn ngon, lắp vào chạy được ngay, giá cả hợp lý, shop gói hàng cẩn thận, thời gian giao hàng nhanh, quá ưng ý 2022-05-10 00:04 trung4419 Bọc hàng rất chắc chắn luôn nha hàng ok nên mua nhé mng giao hàng nhanh 2022-01-05 23:10 h*****6 Cpu là hàng cũ nhưng còn mới, cắm vô lên luôn nhưng nó làm card nóng lên 4-5 độ nên hơi thất vọng 2022-03-30 22:45 Sản phẩm tương tự Xem tất cả CPU PC E8400 cpu e8500 Core 2 dual E8400#E8500 - Ruby3939 CPU các loại: Q9500, Q9400,Q8400,G2020.I33220, G3250, G3240..+ TẶNG keo tản nhiệt CPU Intel Core™2 Duo Processor E8500, E8400 sk 775 kèm keo tản nhiệt Bộ vi xử lý Cpu core 2 Duo E8400 - E8500 - E8600 sk 775 [Mana PC] Card Màn Hình NVIDIA GT730 2GB DDR3 64Bit Hàng Đẹp cpu E8400,chip E8400 sk 775 #E8400 Chip CPU intel Core 2 Duo E8400 3.0 GHz/6M Chính Hãng Cpu cho máy tính intel E8400, E8500 bóc main Ram máy bàn DDR2 2gb/800 rám máy bộ 2gb/800 #DR2 2gb/800 dr2 2gb ddr2 1gb/800/667 cpu desktop Q9650 /Q9400/ X3230 / Q6600 socket 775/ tặng keo tản nhiệt Chíp các mã: Q8400, Q9400. Q9500, g2030. g3250, g3260 tặng keo tản nhiệt. RAM DDR3 2G 4G BUSS 1333 1600 Kingmax Kington Gkill VGA 420 630 730 750 750ti 1050ti 1060 1080 Main H61 B75 H81.... Ram DDR2 2GB Ram máy tính DDR2 2GB lắp G31 G41 Mua ngay [2]LGA 775 (land grid array 775), also known as Socket T, is an Intel desktop CPU socket. Unlike earlier common CPU sockets, such as its predecessor Socket 478, the LGA 775 has no socket holes; instead, it has 775 protruding pins which touch contact points on the underside of the processor (CPU).[3] The socket had an unusually long life span, lasting 7 years until the last processors supporting it ceased production in 2011. The socket was superseded by the LGA 1156 (Socket H) and LGA 1366 (Socket B) sockets.
(some of the processors listed here might not work on newer Intel based chipsets)
For LGA 775, the distance between the screw-holes for the heatsink is 72 mm. Such heat-sinks are not interchangeable with heatsinks for sockets that have a distance of 75 mm, such as LGA 1156, LGA 1155, LGA 1150, LGA 1151 and LGA 1200. LGA 775 was the last Intel socket for desktops for which third-party companies manufactured chipsets. Nvidia was the last third-party manufacturer of LGA 775 chipsets (its final product was MCP7A family, marketed as GeForce 9300/9400, launched in October 2008), as other third-parties discontinued their products earlier. All chipsets for superseding sockets were exclusively designed and manufactured by Intel, a practice later also adopted by AMD when they first launched APUs in 2011 (Socket AM3+ processors, also first launched in 2011, were usually paired with AMD chipsets, but some motherboards using third-party chipsets were also manufactured, usually with Nvidia chipsets, as Socket AM3+ design directly derived from earlier Socket AM3 design). IntelPentium 4 chipsets
Core 2 ChipsetsLakeport: 945PL / 945P / 945G / 945GC / 945GZ / 955X / 946PL / 946GZ P SiS
VIAPT800 / PM800 / PT880 / PM880 / P4M800 / P4M800 Pro / PT880 Pro / PT880 Ultra / PT894 / PT894 Pro / P4M890 / PT890 / P4M900 PT880 Pro also supports AGP and PCI-Express at the same time, but only one port can be used at a time. ATIATI Radeon Xpress 200 / ATI Radeon Xpress 1250 / ATI CrossFire Xpress 3200 NVIDIAnForce4 Ultra; nForce4 SLI XE; nForce4 SLI; nForce4 SLI X16; nForce 570 SLI; nForce 590 SLI; nForce 610i; nForce 630i; nForce 650i Ultra; nForce 650i SLI; nForce 680i LT SLI; nForce 680i SLI; nForce 730i; nForce 740i SLI; nForce 750i SLI; nForce 760i SLI; nForce 780i SLI; nForce 790i SLI; GeForce 9300; GeForce 9400[2]
Intel Core 2 Duo E7500 2.93 GHz installed into LGA 775 socket The force from the load plate ensures that the processor is completely level, giving the CPU's upper surface optimal contact with the heat sink or cold-water block fixed onto the top of the CPU to carry away the heat generated by the CPU. This socket also introduces a new method of connecting the heat dissipation interface to the chip surface and motherboard. With LGA 775, the heat dissipation interface is connected directly to the motherboard on four points, compared with the two connections of the Socket 370 and the "clamshell" four-point connection of the Socket 478. This was done to avoid the reputed danger of the heat sinks/fans of pre-built computers falling off in transit. LGA 775 was announced to have better heat dissipation properties than the Socket 478 it was designed to replace, but the Prescott core CPUs (in their early incarnations) ran much hotter than the previous Northwood-core Pentium 4 CPUs, and this initially neutralized the benefits of better heat transfer. However, the later Core 2 processors run at much lower temperatures than the Prescott CPUs they replaced. Processors with lower TDP and clock speeds only used Thermal Interface Compound in between the die and the integrated heat spreader (IHS), while processors with higher TDP and clock speeds have the die soldered directly to the IHS, allowing for better heat transfer between the CPU and the integrated heat spreader. The LGA 775 contact points on the underside of a Pentium 4 Prescott CPU All LGA 775 processors have the following mechanical maximum load limits which should not be exceeded during heat sink assembly, shipping conditions, or standard use. Load above those limits could crack the processor die and make it unusable.
The transition to the LGA packaging has lowered those load limits, which are smaller than the load limits of Socket 478 processors but they are bigger than Socket 370, Socket 423 and Socket A processors, which were fragile. They are large enough to ensure that processors will not crack. Compatibility is quite variable, as earlier chipsets (Intel 915 and below) tend to support only single core NetBurst Pentium 4 and Celeron CPUs at an FSB of 533/800 MT/s. Intermediate chipsets (e.g. Intel 945) commonly support both single core Pentium 4-based CPUs as well as dual core Pentium D processors. Some motherboards using the 945 chipset could be given a BIOS upgrade to support 65nm Core-based processors. Other chipsets have varying levels of CPU support, generally following the release of contemporary CPUs, as LGA 775 CPU support is a complicated mixture of chipset capability, voltage regulator limitations and BIOS support. For example, the newer Q45 chipset does not support NetBurst-based CPUs such as the Pentium 4, Pentium D, Pentium Extreme Edition, and Celeron D. Some Core 2 and other Socket 775 processors are capable of hardware-accelerated virtualization. However, more recent hypervisors might not be compatible with these CPUs because they lack support for Extended Page Tables.
Retrieved from "https://en.wikipedia.org/w/index.php?title=LGA_775&oldid=1088853610" |